Ebode IP Vision 58 Manual de usuario descargar pdf (Pagina 64)

Manual version 1 – March 2012 64 IP Vision 58

Sound on Alarm

When motion is detected, there will be a beep sound during the alarm, you can control this sound here.

If Enabled, there will be sound once alarmed.

If Canceled, there will be no sound once alarmed.

Record on Alarm

If you want the camera to record for every alarm, choose Record on Alarm to enable it.

If you do not want the camera to record once the alarm is triggered, cancel it here.

Figure 10.4

Once alarm occurred, there will be some representation:

1. The corresponding status light turns Red and keeps blinking.

Figure 10.5

2. If you set Sound on Alarm, plug an earphone or a speaker to the computer you use, you can hear the

beep sound when alarmed. (Figure10.4)

3. If you set Record on Alarm, the camera will record automatically for approx one minute. You can find the

record file in the folder which you set. (Figure 10.4)

4. If you set Send Mail on Alarm, you will receive email alarm alert once motion triggered. (Figure 9.9)

5. You can also set Scheduler to enable the camera sends emails during a special time range you want.

(Figure 10.3)

6. If you set Upload Image on Alarm, it will upload images to the FTP Server you set already once alarmed.

(Figure 10.2)

NOTE: Each alarm only lasts for approx one minute, all the above functions for motion detection triggered only.

REC Automatically and Save to PC

When you enable motion detect and open the camera monitoring page on the PC. If there is an alarm

triggered, REC will start automatically for several seconds and save to the PC.

New Feature: Start the motion detection compensation and Alarm notification by Http.

3.18 Path Settings

Figure 10.6

Here you can set record path and alarm record path for the camera.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 76 77

Sin comentarios

Ebode IP Vision 58 Manual de usuario Pagina 64